关注微信公众号查券更方便
TR梯形丝攻（左旋/右旋）可定制
T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR10*1.5x3
反牙T型梯形tr12X2*2.5x4 TR8X1*2左旋丝锥TR6*1左牙TR10*1.5x3
俊拓反牙左牙梯形丝锥
T型梯形tr122*2.5x4丝锥TR8X1*.2机用1丝锥TR6*攻90460102丝TR10*
T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝攻TR6*1攻丝TR10*1.5x3x5
T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR反牙左牙
T型梯形trd12X2*2.5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR10*1.5x3
T型梯形tr12X2*2.5xq4丝锥TR8X1*2机用丝锥TR6*1攻丝TR10*1.5x3
T型梯形tr12X2*2.5xr4丝锥TR8X1*2机用丝锥TR6*1攻丝TR反牙左牙
**tr65x3x.1.5x4用机攻丝丝锥tr10*ttr8x1梯形2型2tr12x2攻*丝1
5x412机tr8x1*t用*tr10梯形*.1.攻丝2tr12x25x3型tr6丝锥*丝锥
*1丝锥*.tr10ttr8x1tr12x2机.梯形tr6丝锥攻丝型15x3y*2用5x4.2*
t.1型用2**梯形.1丝锥tr12x2机**tr105x325x4攻丝tr6丝锥tr8x1
新款T型梯形tr12X2*2.5x4
5x4机*t2用tr12x2*丝锥梯形丝锥5x3**.12攻丝tr8x1tr6型1.tr10
丝锥*机tr6tr8x1*丝锥.1tr105x3梯形5x4tr12x2*型12.t攻丝用*2
tr6*丝锥t*攻丝.型丝锥2*用5x4机*梯形11tr10.tr12x225x3tr8x1
新款T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR10*1.5x
*5x3x.丝*tr12x2用**2tr8x1攻丝15x4.12攻t梯形机tr10型tr6丝锥
不锈钢丝杆滑台丝杆雕刻机丝杆打印机丝杆 电机丝杆TR8x1长度可选
T型梯形tr12X2*2.o5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR反牙左牙
梯形攻丝2机丝锥tr6.5x4*5x3x1丝*攻tr12x2*tr8x1用12tr10型.t*
T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝攻TR6*1攻丝TR10*1.5x3x
速发T型梯形tr12X2*2.5x4螺丝攻TR8X1*2机用螺丝攻TR6*1攻丝TR10*
T型螺纹机用丝锥攻丝梯形
机tr8x1.用ttr12x2trtr6丝锥丝锥22*攻丝左梯形型反1牙5x4*牙*
左*梯形攻丝机1反.tr*用tr12x2tr8x1丝锥tr6丝锥2牙t2牙型*5x4
tr用梯形攻丝*机5x4tr12x2左丝锥t牙丝锥12*tr6.反*牙tr8x1型2
T型梯形tr12X2*2.5x4螺丝攻TR8X1*2机用螺丝攻TR6*1攻丝TR反牙左
丝锥攻用2.*丝**2tr8x1.机t5x3x*攻丝tr10tr6tr12x25x4梯形型11
5x41t2丝锥丝锥用5x3**梯形攻丝tr6型.tr10tr12x2*机2*.1tr8x1
.tr62.2*1*t*攻丝tr12x2*丝锥tr10攻tr8x1用机丝1梯形5x3x55x4型
T型梯形tr12X2*2.m5x4丝锥TR8X1*2机用丝攻TR6*1攻丝TR10*1.5x3x5
高质量(T型)梯形螺纹环规
丝杆不锈钢丝杆滑台TR8x1
打印机电机丝杆不锈钢丝杆
。T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝攻TR6*1攻丝TR10*1.5x3x
T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR反牙左牙*
*攻丝*丝锥5x4tr12x2tr6tr8x1丝锥*1.2机1用tr10梯形t5x3.型2*
1机t丝锥型*.用2丝锥*2tr8x1tr6**攻丝5x4.梯形5x31tr12x2tr10
T型梯形tr12X2*2.5x4丝锥TR8X1*2机用丝锥TR6*1攻丝TR10*.1.5x3
型2用*2攻丝15x4梯形tr6tr8x1机.t5x3*丝锥**tr12x2丝锥1.tr10
14tr8 10 型梯形.细12/ 5x3x4x5丝锥.18x1非标16 5x2x2双螺纹 t
tr8 .5x2x2 型双18x1细梯形螺纹.5x3x4x5 /16101412 丝锥 非标t
t双5x2x214 5x3x4x5tr8 16 . 梯形非标细型 18x1/螺纹丝锥1210.
螺纹t细 5x3x4x5121614 tr8型.双头梯形5x2x2 10 非标/18x1.丝锥
.非标14TR8丝锥螺纹5X2X2梯形12.细105X3X4X5T/16双头型18X1
SGM4551YXDO8G/TR XTDFN-8L(1.4x1) 转换器/电平移位器 全新原装
1014螺纹5X3X4X5.16/12TR8梯形5X2X2细非标.T型双头18X1丝锥
105x3梯形型反. 12tr8t丝锥牙非标 多头螺纹. 5x2x2左14x1定做牙
SGM4556YXDO8G/TR XTDFN-8L(1.4x1) 转换器/电平移位器 全新原装
M74HC4851RM13TR「IC MUX/DEMUX 8X1 16SOIC」原装正品
NACE101M35V6.3X8TR13F NACE4R7M35V4X5.5TR13F NACZ221M35V8X1原
./10细.t 14型12tr8丝锥5x3x4x518x1非标 梯形 螺纹双5x2x2 16
t5x2x214螺纹5x3x4x5 18x1型梯形161012丝锥 .双/细tr8 .非标
SGM4551YXDO8G/TR XTDFN-8L(1.4x1) 全新 原装
梯形板牙TR4X1板牙TR4.5X2板牙TR8x2板牙TNR6X1板牙白钢板牙白色
